hot sell electric heat treatment furnace

1,high efficiency 2,safe and reliable 3,small size, light weight 4,eliminate high pressure 5,wide frequency band

 

 

Major Characteristic:

1)Heating fastthis is the heating rate of less than 1 second (speed adjustable speed control) 2)Heating widewide range of metal parts can be heated (according to the different shape of the workpiece replacement of removable induction loop) 3)Easy installationconnect the power, induction loop and out of the water can be used; small size, light weight, easy to use 4)Simple operation a few minutes to learn 5)Start fastyou can start with water after the heating power 6)Low power consumptionhigh-frequency device than the old-fashioned tube about 70% energy saving, the smaller the power consumption of the smaller parts 7)Good effectthe heating is very uniform (also by regulating the induction coil density, so that all parts of the workpiece to obtain their desired temperature), heating up fast, less oxide layer after annealing without waste 8)Adjustable powerThe Promise adjust the output power 9)Protection allwith over voltage, over current, overheating, lack of water and other alarm indicator, and automatic control and protection

 

Application Field:

 

 

This model of WH-VI-50 high frequency induction heating equipment is particularly suitable for heat treatment and quenching, melting, annealing, the metal through the heat forging, extrusion, welding, brazing.

 

1,Avariety of steam, Motorcycle high-frequency hardening heat treatment, such as: crankshaft, connecting rod, piston pin, camshaft, valves,various gears within the gearbox, a variety of fork, all kinds of spline shaft, drive axle, various small shaft crank pin, a variety of rocker, rocker shaft, high-frequency hardening heat treatment.

 

2,The hardware high-frequency hardening heat treatment, such as pliers, hammers, strong pliers, wrenches.

 

3,Hydraulic components such as: piston pump plunger, rotor pump rotor, conversion shaft of the valves,  gear of gear pump high frequency quenching.

 

4,Various electric tools gear shaft of the high-frequency hardening heat treatment. 5,A variety of carpentry tools, such as: axes, planing and other heat treatment.

Tchnical Parameter Table:

Model	WH-VI-50
Worker power	Three phase 380V/50Hz
Working voltage range (AC)	342V~430V
Max input current	75A
Max output power	50KVA
Oscillation frequency	40-60KHz
Continuous load rate	100%
Cooling water pressure	0.1-0.3mpa
Host weight	55kg±5%
Transformer weight	35kg±5%
Host dimensions(L*W*H)mm	590*450*780
Transformer dimensions (L*W*H)mm	420*355*450
Particular recommended	Standard hot forging quenching
Temperature protection	50 degrees

 

hot sell electric heat treatment furnace